Free Tool · Live Network Data

Bitcoin Mining Calculator

Estimate daily profit, breakeven power rate, and hardware payback with live network data. Works for any ASIC, at home or hosted.

Estimate Your Mining Profit

Pick a miner from our catalog or enter any machine’s specs. BTC price and network hashrate load live; every field stays editable so you can stress-test your assumptions. Treat the result as a snapshot of today’s conditions, since mining profitability moves daily. For Equihash hardware, the Zcash mining calculator runs the same math for ZEC.

Your setup

View this miner in the shop

Network conditions

Using June 2026 defaults while live data loads…

Block reward 3.125 BTC · next halving ~2028

Results

Estimated net profit / day

—

at today’s difficulty, after power and pool fees

A moment-in-time snapshot at today’s BTC price and network difficulty. Mining profitability changes every day.

Revenue / day
— —
Power cost / day
— —
Profit / month
— —
Profit / year
—
Electricity cost to mine 1 BTC
—
Breakeven power rate
—
Hardware payback
—

Estimates only, and a snapshot of today’s conditions. Difficulty and price move daily, and we assume 100% uptime. Excludes transaction-fee revenue, hosting setup fees, and taxes. The cost example is not a service quote. We quote monthly hosting and management fees for each fleet. Include those fees in your assessment. Not financial advice.

How This Calculator Works

Bitcoin pays miners in proportion to the computing power they contribute. The network mines about 144 blocks per day, and each block pays a block subsidy that halves every 210,000 blocks. The calculator reads the live block height to apply the current reward (3.125 BTC today, halving to 1.5625 BTC around 2028). Your machine’s share is its hashrate divided by total network hashrate, about 859 EH/s as of June 2026; the Cambridge Bitcoin Electricity Consumption Index tracks the live figure.

BTC/day = (your TH/s ÷ network TH/s) × 144 blocks × 3.125 BTC × (1 − pool fee)

We calculate revenue from BTC output at market price. We estimate operating costs as watts × 24 hours ÷ 1,000 × your selected cost rate. Machine efficiency and the full service invoice affect your results. U.S. residential electricity averages about $0.17/kWh per the U.S. Energy Information Administration, and our approximate hosting service rates are Approx. $0.07/kWh for air-cooled miners and Approx. $0.075/kWh for hydro-cooled miners. We bill hosting and management services monthly. Include other agreed charges and taxes when you compare deployments. Flex Mining requires a separate consultation. See our beginner’s guide to starting Bitcoin mining for the full decision framework, or how hosting works if you already own hardware.

Live BTC price and network hashrate come from the open-source mempool.space API when the page loads. The calculator excludes transaction-fee revenue (upside for you) and assumes 100% uptime. It also ignores future difficulty changes, so treat the results as a snapshot of today’s conditions.

Calculator Questions

How is Bitcoin mining profit calculated?

You earn Bitcoin in proportion to your share of network hashrate. The formula: (your TH/s ÷ network TH/s) × 144 blocks per day × 3.125 BTC block subsidy, minus pool fees. Multiply the BTC by market price for revenue, then subtract electricity (watts × 24h ÷ 1000 × your $/kWh rate). This calculator runs that math with live network data.

What electricity rate should I use in the calculator?

For home mining, use your utility rate. For Hosting, select our air-cooled service rate of Approx. $0.07/kWh or hydro-cooled service rate of Approx. $0.075/kWh. We bill hosting services monthly. Include other agreed charges and taxes when you compare costs. Book a consultation for Flex Mining terms.

Is Bitcoin mining still profitable in 2026?

Profit depends on machine efficiency, network conditions, and full operating costs. Use your utility rate for home mining or the service rate that matches your hosting cooling type. Add other agreed charges and taxes. The calculator does not model Flex Mining settlement terms.

Does the calculator account for difficulty increases?

No. It snapshots today’s network hashrate, which the Bitcoin protocol re-targets every 2,016 blocks (about two weeks). Network hashrate has trended up through most of Bitcoin’s history, which shrinks per-machine output over time, while BTC price swings cut both ways. Treat the monthly and yearly figures as estimates of today’s conditions.

What is a good efficiency (J/TH) for a Bitcoin miner in 2026?

Current-generation flagships run 12–16 J/TH and solid mid-cycle hardware runs 17–22 J/TH. Above ~30 J/TH, you need cheap power to break even. Lower J/TH means less electricity per terahash, which raises your margin and your cushion against difficulty increases.

Can MiningStore host a miner I buy from the shop?

Ask our team to confirm your model, cooling needs, and site capacity. We provide hosting and management services at our Iowa facilities and bill you monthly. You choose the machines, mining pool, and payout wallet. Book a call to review the full service terms for your fleet.

Sources & References

MiningStore publishes the third-party data sources behind the claims on this page so operators, investors, and researchers can verify every figure against primary reporting.

  1. Bitcoin Network Hashrate & Price Data (REST API) — mempool.space
  2. How Bitcoin Works — Halving Schedule & Supply Cap — Bitcoin.org
  3. Electric Power Monthly — Average Price of Electricity to Ultimate Customers — U.S. Energy Information Administration
  4. Cambridge Bitcoin Electricity Consumption Index (CBECI) — Cambridge Centre for Alternative Finance, University of Cambridge

Hosting and Flex Mining Service Terms

Hosting

You choose your machines, mining pool, and payout wallet. Our technicians apply your settings and provide hosting and management support.

You pay a monthly invoice for hosting and management services. You provide a service deposit of up to two months of service fees, as your agreement requires.

Your mining pool pays your wallet. MiningStore does not collect your hosting revenue.

Flex Mining

You own the miners. MiningStore chooses the pool and manages the fleet and payouts.

We deduct monthly service fees and agreed costs from mining revenue, then apply the profit split in your agreement. You provide no service deposit for Flex Mining.

We hold mining funds for you during the month. At month-end, we settle fees and agreed costs and pay your share of that month's mining rewards.

Book a Flex Mining consultation if you own miners rated 15–22.5 J/TH or plan to acquire them.

Book a Flex Mining consultation

We confirm monthly service fees, any setup or repair charges, deposit terms, and the Flex profit split in your quote and agreement.

Compare Hosting and Flex Mining

Take These Numbers to a Call

Book a 30-minute call to review your miner model, hosting needs, and deployment timeline.

Get the guide

Tell us where to send it.

We'll email you occasional mining insights and you can unsubscribe from any message. We never sell your details.